- EYEBALL GIMBAL LED Downlight with Directional Rotatable Light panel: 40° Lens beam angle with 360° Rotation and 30° tilt; No gap between the trim and the rotatable light engine (eyeball), regular Gimbal Downlights have the gap and it makes visible space above the ceiling.
- COLOR SELECTABLE Correlated Color Temperature (CCT) Options 3CCT: 3000K (Warm White), 4000K (Pure/Natural White), 5000K (Daylight); Easy to set Color Temperature by switching a lever on the Junction Box (see photo); If you are not sure which color temperature is suitable for your room this product is for you; By switching colors you can find which color is suitable.
- ENERGY EFFICIENT: up to 90% energy-saving compare with halogen counterpart. Estimated Energy Cost per Year: $0.96 based on 3hrs/day, 11c/Kwh. Brightness: 730 Lumens 60W halogen bulb equivalent, DIMMABLE; Suitable for new installation or for RETROFIT projects to replace the existing halogen light bulbs; Easy installation/replacement.
- CERTIFIED - ETL Listed (cETLus certified for Canada and USA), certified to CSA, Conforms to Canadian Electrical Code; IC Rated (approved for direct contact with insulation); Suitable for Damp Locations. EXTREMELY LONG LIFE 39000 hours; Five year limited warranty.
- EASY TO INSTALL No housing required (Housing-free); connect the provided junction box to the light panel with male/female cable and use spring clips to fix/mount it on the ceiling; ENDLESS POSSIBILITIES: kitchen lights, kitchen cabinets, bathrooms, basements, entryways, utility closets, corridors and other small spaces.
Technical Specifications:
| Voltage | 120V |
| Power Consumption |
8W |
|
Brightness |
730Lm |
| Equivalent to |
60W Halogen, 75W Incandescent |
| Dimming Range |
100% -10% |
| Color Temperature Options |
3CCT: 3000K, 4000K, 5000K |
| Color Rendering Index |
CRI82 |
| Light Panel Dimensions |
Trim Diameter: 3-5/16" (84mm), Base Diameter: 2-1/2" (64mm), Light Panel Hight: 2-1/4" (56mm). |
| Cutout Diameter |
2-3/4" – 2-7/8" (70mm-73mm) |
| Note for Retrofitting projects |
If you are planning to replace your lights, make sure the downlights fit the existing holes in your ceiling. Be cautious, as the holes may be either too large or too small for the new light fixtures, potentially causing installation issues. |
| Cord length |
11-13/16" (30cm) |
| Operating Temperature |
-20°C to +40°C |
| IC Rated |
Both the LED driver and light panel are IC rated, meaning they are approved for direct contact with insulation. |
| Locations |
Suitable for damp locations. Note: Not for wet locations where the light panel or junction box may be exposed to direct water contact (shower stalls, outdoor soffits, gazebo, etc.). Indoor use is recommended. |
| Certification |
cETLus (Intertek), Conforms to UL STD 1598 |
| Life Time |
39000 hours |